Notice: Any messages purporting to come from this site telling you that your password has expired, or that you need to "verify" your details, making threats, or asking for money, are
spam. We do not email users with any such messages. If you have lost your password you can obtain a new one by using the
password reset link.
Entire forum
➜ Electronics
➜ G-Pascal
➜ G-Pascal 64K RAM PCB + Programmer
G-Pascal 64K RAM PCB + Programmer
|
It is now over 60 days since the last post. This thread is closed.
Refresh page
Posted by
| Mike Mclaren
(2 posts) Bio
|
Date
| Thu 24 Aug 2023 06:01 AM (UTC) |
Message
| I love this G-Pascal package. Thank you. Well done.
I have a 2.8"x4.0" G-Pascal compatible PCB design with 64K RAM and optional 28C256 or 39SF010A ROM. A Nano is fitted on-board and provides a 1, 2, 4, or 8 MHz clock, an econo' reset function, and in-circuit ROM programming. If you build the board without the ROM the Nano will load the G-Pascal image into 64K RAM at start-up.
Is there a way to post pictures/drawings here?
picture 1: http://forum.6502.org/download/file.php?id=18790&mode=view
picture 2: http://forum.6502.org/download/file.php?id=18788&mode=view | Top |
|
Posted by
| Nick Gammon
Australia (23,070 posts) Bio
Forum Administrator |
Date
| Reply #1 on Thu 24 Aug 2023 08:07 AM (UTC) Amended on Fri 25 Aug 2023 02:59 AM (UTC) by Nick Gammon
|
Message
| No, but I copied them to my server, so here they are:
|
- Nick Gammon
www.gammon.com.au, www.mushclient.com | Top |
|
Posted by
| Nick Gammon
Australia (23,070 posts) Bio
Forum Administrator |
Date
| Reply #2 on Thu 24 Aug 2023 08:09 AM (UTC) |
Message
| Nice work. :) |
- Nick Gammon
www.gammon.com.au, www.mushclient.com | Top |
|
Posted by
| Nick Gammon
Australia (23,070 posts) Bio
Forum Administrator |
Date
| Reply #3 on Thu 24 Aug 2023 08:10 AM (UTC) |
Message
| Any screenshots/photos of G-Pascal in operation? |
- Nick Gammon
www.gammon.com.au, www.mushclient.com | Top |
|
Posted by
| Mike Mclaren
(2 posts) Bio
|
Date
| Reply #4 on Thu 24 Aug 2023 08:35 AM (UTC) Amended on Sun 27 Aug 2023 02:58 AM (UTC) by Mike Mclaren
|
Message
| I took this screenshot because I was geeked to see G-Pascal running with an 8-MHz clock and 38400 baud bit-banged serial after replacing the Rockwell CPU and VIA with WDC parts.
Picture 3: http://forum.6502.org/download/file.php?id=17073&mode=view
Here's another board photo. The only part I haven't found on-the-shelf at distributors is the 'skinny' 64K RAM but they seem plentiful and relatively inexpensive from an AliExpress vendor (5 for $3.36, including shipping to USA).
Picture 4: http://forum.6502.org/download/file.php?id=18789&mode=view | Top |
|
Posted by
| Nick Gammon
Australia (23,070 posts) Bio
Forum Administrator |
Date
| Reply #5 on Fri 25 Aug 2023 03:00 AM (UTC) |
Message
|
|
- Nick Gammon
www.gammon.com.au, www.mushclient.com | Top |
|
The dates and times for posts above are shown in Universal Co-ordinated Time (UTC).
To show them in your local time you can join the forum, and then set the 'time correction' field in your profile to the number of hours difference between your location and UTC time.
4,028 views.
It is now over 60 days since the last post. This thread is closed.
Refresh page
top