How do you bacome an imp?

The subject is easy to read.

There are no level markers in the pfiles????

There are level markers in pfiles, what you need to go is to make two characters, one who is your new immortal, and one who is your temp character.
then login and register your temp character, logout and use a text editor to edit level from 1 to 101 and move the pfile to the immortal directory, then login with the char again, and login with your new immortal, then use the advance command with your temp character to advance your new immortal to level 101, and use the set command to set newimmortal to 1 on your new immortal, then logout with both and check that your new immortals navn isn't in two directories under the pfile dir, and delete your temp character, and relogin with your new immortal and enjoy. :)

P.s. when i did this trick i did it to get the mana and hp right. :) there is easier ways to do it, if you don't care about hp and mana, also you might find that when you level a new immortal to immortal level you will find two pfiles one in the letter directory (eg. e for epona) and one in the immortal directory, remove the one in the letter directory and your new immortal will be able to login again.

The first part (updating the level) was covered in the post Setting up DoT.

My other notes for making yourself nice and powerful are:

• trust self 0
• prompt all
• noble self
• set char self newimmortal 1
• set char self maxhp 1000
• restore self

Type all of the above in once you have made yourself level 101.

Just a note about:
set char self newimmortal 1

This gives you all skills/spells at 101%, olc security of around 6, all attributes at max etc.

The only side effect is it also turns on a log on yourself, so type 'log self' after using it.

One other command to use it is:
set char self security 9

I would also strongly recommend turning on
wiznetdefault confirm

As a starting point for wiznet settings.

- Kal